There it is after a lot of rough shaping, around 6 hours or so. As you can see I removed a lot of wood with a block plane and a drawknife. Tomorrow I will sand and then stain it.
Sunday, April 5, 2009
Shavings of time
There it is after a lot of rough shaping, around 6 hours or so. As you can see I removed a lot of wood with a block plane and a drawknife. Tomorrow I will sand and then stain it.
Friday, April 3, 2009
Up shit creek without...
So I am crafting a Greenland paddle to go with the kayak. So there were a couple of setbacks, a band saw that was dull enough to burn wood rather than cut, a table saw unable to match cut angles and the arduous handsaw and block plan works has made this process difficult. At least I can watch movies and work on it at the same time. I am 5 hours in, pictures will follow.
Sunday, March 22, 2009
Paint it like you mean it
Saturday, March 21, 2009
Shrinkage
Still, I got it all sewn in and in 45 degree weather I carried the kayak to the side of the house and soaked it under the water faucet. Sure there was no hose because it was still cold enough to snow yesterday, so I literally carried it back and forth under the faucet to get it all wet. A little application of the iron and now to wait for it to dry. The shrinkage should remove any wrinkles and hopefully the frame can stand the pressure. But as it sits moistly on the porch, this is how it looks.
Thursday, March 19, 2009
At the Kayak Again
In November I started building a skin-on-frame kayak on my front porch with reused materials. By the end of the weekend I had most of the frame finished. The next day the temperature plunged to a high of 20 degrees and stayed that way until now. For those months no work could be done, I found the wood too brittle and would crack at the slightest touch. Two days ago it got above freezing and I started work again. I touched up the frame and made sure it was relative sound. I know this is really just a prototype so I am not going to sweat it too much, I won't use it past this fall to be safe. This is a composite picture of the naked frame right side up:
And upside down. That is the front porch on which I have built this whole thing:
In order to skin this I tried something new for me: canvas. With nylon you waterproof it with polyurethane, but canvas was the traditional solution prior to the invention of synthetic cloth. I pulled the canvas over the frame and tacked it down with a staple gun as tight as I could.
I then used a curved needle to hand-sew a running stitch and then a whip stitch which leaves an awesome Frankenstein-like seam down the deck of the kayak. The next step is steam bending the cockpit rim, sewing it in, and then painting it. Given the name of Phoenix, I have some graphic design ideas that should look stunning.
And upside down. That is the front porch on which I have built this whole thing:
In order to skin this I tried something new for me: canvas. With nylon you waterproof it with polyurethane, but canvas was the traditional solution prior to the invention of synthetic cloth. I pulled the canvas over the frame and tacked it down with a staple gun as tight as I could.Tuesday, March 10, 2009
All good things must come to an end.
My entire Tuesday was spent traveling, so this will be short I flew out of Orange County again and the plane banked over Dana Point as it started for Texas. I could see where I was staying with my sister and the town I called my home for two years. Since I was heading East I lost 3 hours so I saw the sunset from the air just over Pittsburgh:
And this is a comic I started drawing on the second flight, once I get it done I will put it up here.
Monday, March 9, 2009
And this would be Sunday...
Okay, so onto Sunday. After a continental breakfast at the hotel (I like healthy yogurt covered with whipped cream apparently) we met up again with my Uncle and Aunt to take to the skies. By that I mean the Tramway that is right outside of Palm Spring. It rises over 6,500 feet and one hell of a technical feat.
It takes about 15 minutes but it was quite a ride. There are towers along the way to keep that life-saving cable off the ground. Each time you would go over the hump at the tower the tram would sway in an excitingly disturbing and life threatening way towards the rock wall. As you can see my Uncle is enthralled.
It is a really amazing ride and at the top the view is stunning. This is the gang looking for nude sunbathers below of course.
What neither my sister nor I had considered that the snow on the top was because of cold, not an artificial snow machine blowing ripped plastic. We were dressed for warmer climates, i.e. shorts, no jackets, but it was 38 degrees up there and that snow you see behind is about a foot deep. Still, my Eastern blood had not entirely thawed and I was fine. This panoramic does not due justice to the distance or height, it was truly stunning.
After that we went to see why my relatives were in Palm Springs in the first place (they live in Colorado): the BNP Paribus Open. I am not a tennis follower but I could see by the grounds it was a damn big event. We watched one of the qualifier matches as my Uncle described the insanely complicated scoring. Gail won so a huzzah for her. The real event starts tomorrow though and they are here for the week to watch the action.
After parting ways we drove back to the coast. Being back is nice, some sleep and a slow day tomorrow will be even better.
After that we went to see why my relatives were in Palm Springs in the first place (they live in Colorado): the BNP Paribus Open. I am not a tennis follower but I could see by the grounds it was a damn big event. We watched one of the qualifier matches as my Uncle described the insanely complicated scoring. Gail won so a huzzah for her. The real event starts tomorrow though and they are here for the week to watch the action.After parting ways we drove back to the coast. Being back is nice, some sleep and a slow day tomorrow will be even better.
Subscribe to:
Posts (Atom)